Auto-detects sensor problems and gives direct solutions.
Detected: Soil Moisture: Soil is too dry. | Soil Temperature: Soil temperature is low. | Soil pH: Soil is too acidic. | EC: Soil fertility strength is low. | Nitrogen: Nitrogen is very low.
Solution: Soil Moisture: Run irrigation, verify pump flow, and check root-zone moisture again. | Soil Temperature: Protect from cold conditions and keep the root zone warmer. | Soil pH: Correct the pH gradually and verify soil chemistry before treatment. | EC: Use balanced nutrition and check whether fertilizer level is too low. | Nitrogen: Apply nitrogen in a controlled way and monitor green recovery.
Yellow Analysis: Low moisture can cause yellow and weak leaves. | Low pH can lock nutrients and cause yellow leaves. | Low EC may indicate weak nutrient supply.
Status: Low
Current: 0.0%
Ideal: 30% - 75%
Problem: Soil is too dry.
Lack / Condition: Water deficiency around roots.
Solution: Run irrigation, verify pump flow, and check root-zone moisture again.
Status: Low
Current: 0.0C
Ideal: 18C - 35C
Problem: Soil temperature is low.
Lack / Condition: Slow root activity and slower nutrient uptake.
Solution: Protect from cold conditions and keep the root zone warmer.
Status: Low
Current: 0.0
Ideal: 5.5 - 7.5
Problem: Soil is too acidic.
Lack / Condition: Nutrient availability can become unbalanced.
Solution: Correct the pH gradually and verify soil chemistry before treatment.
Status: Low
Current: 0
Ideal: 400 - 2500
Problem: Soil fertility strength is low.
Lack / Condition: Weak dissolved nutrient concentration.
Solution: Use balanced nutrition and check whether fertilizer level is too low.
Status: Low
Current: 0
Ideal: 40 or above preferred
Problem: Nitrogen is very low.
Lack / Condition: Leaf greenness is weak and growth may slow.
Solution: Apply nitrogen in a controlled way and monitor green recovery.
Status: Low
Current: 0
Ideal: 20 or above preferred
Problem: Phosphorus is very low.
Lack / Condition: Root support and energy transfer may weaken.
Solution: Use phosphorus in a balanced fertilizer plan.
Status: Low
Current: 0
Ideal: 80 or above preferred
Problem: Potassium is very low.
Lack / Condition: Stress tolerance and plant balance may drop.
Solution: Apply potassium in a balanced feeding plan and observe recovery.
Status: Good
Current: 0
Ideal: Below 2500 safer
Problem: Salinity is in the safer range.
Lack / Condition: No salt excess detected.
Solution: Maintain clean irrigation balance.
Status: Good
Current: OFF
Ideal: Condition based
Problem: Pump state is acceptable.
Lack / Condition: No pump misuse detected.
Solution: Keep rule-based control.
Status: Good
Current: 0
Ideal: Condition based
Problem: Fan behavior is acceptable.
Lack / Condition: No fan issue detected.
Solution: Keep airflow support available.